Basic Transportation Process:
In the AGV project of the automobile seat factory, when the assembly station of the production line needs materials, the demand for materials is issued through the MES system. After the AGV Dispatching System receives the demand for materials, the AGV is dispatched to send the material trolley full of materials to the work station that needs the corresponding materials. Arrive at the work station, put down the full material trolley, and then automatically suspend the empty material truck and transport it to the empty material trolley area. The AGV enters standby and waits for the next cycle.

AGV Model for this Project:
AGV Type | Unidirectional lurking AGV |
---|---|
External Dimension | L1400*W420*H290(mm) |
Minimum turning radius | 600mm |
Travel Direction | Forward, backword, turn left and right, branch |
Driving Lifting Type | Automatic lifting |
Control Method | PLC/AGV Moving Control Unit (Optional) |
Guidance Method | Magnetic Tape Guidance |
Communication Function | RF / WiFi |
Driving Method | Differential Speed Driving |
Driving Power Supply | DC 24V / DC 48V |
Loading Capacity | 500KG / 800KG |
Moving Speed | 0-45m/min (custom support) |
Guidance Accuracy | ±10mm |
Stop Accuracy | ±10mm |
Working Type | 24 Hours |
Gradeability | 2-3 degree |
Charging Type | Manual Charging (optional automatic charging) |
Battery | Lead acid battery / lithium battery, Maintenance Free Battery, Continuous discharge number>300 times |
Safety Induction Range | ≤3m, Adjustable. The distance for emergency brake is less than 20mm |
Human-machine Interface | The touch screen human-machine interface is adopted to easily set the parameter, site or alarm. |
Working Environment | Indoor Temperature: 0-40 Celsius Degree; Relative Humidity: 5%-90% |
Safety Protection | Front Obstacle Testing Sensor + Mechanical Anti-collision Mechanism |
Safety induction range | Detecting range ≤3m, adjustable; Emergency braking distance: <20mm |
Alarm | Sound and Lighting alarm |
Design Life | >10 Years |
Basic Introduction of this Magnetic Strip Guided Automatic Guided Vehicle |
---|
AGV adopts special driving mechanism and special control system with mature technology and stable performance, fully realizes the universality and modularization of system control, and the performance of each functional module is stable. Motors, navigation sensors, landmark sensors and other core components all use high-quality famous brand components such as SICK, SIMENS to ensure stable and reliable operation. |
Drive Unit: differential driving method, DC brushless motor. The driving mechanism has a shock absorption mechanism to ensure that the AGV can run on uneven ground, so as to achieve the shock absorption effect of the vehicle and reduce mechanical damage. |
Control Unit: The control part adopts high-performance embedded system as the central control hub, supplemented by RFID technology, high-efficiency brake circuit and magnetic induction tracking technology. It constitutes a complete sampling-processing-issuing instructions-executing instructions, such a closed-loop control system. |
Controller and Operation Panel: with perfect manual/automatic conversion function, it can operate independently of the transport line in manual state; AGV is not affected during emergency stop or normal line stop, and the AGV can work independently outside the transport line in manual state Operation; AGV has running sound and light prompts, alarm sound and light prompts, AGV working status and fault information, etc. You can set system parameters and modify system parameters through the display and operation panel. |
An obstacle sensor and a buffer protector are installed at the front end of the AGV: the obstacle sensor can detect obstacles within the range of 0-180° in the direction of the AGV cart (distance 0–3M adjustable). When the obstacle is detected, the AGV It will slow down and then stop (distance adjustable), and an alarm will prompt you to remove the obstacle. When the obstacle is removed, the AGV car will start automatically. When the obstacle touches the anti-collision mechanism, the AGV automatically stops immediately and sound and light alarm will start. The operator must manually start the AGV after clearing the obstacle, and the AGV can continue to work. |
Buffer Protector: a mechanical protection device that contains a trigger sensor switch. When the AGV is in direct contact with an obstacle, the mechanical protection device and the electronic switch are triggered to automatically cut off the power. After the AGV stops, it must be manually restored before the button can be restarted to protect pedestrian safety. |
The AGV is equipped with eye-catching signal lights and audible alarm devices to remind surrounding operators. |
Emergency Stop Switch: The AGV is equipped with an emergency stop switch; after the emergency stop switch is pressed, the power of each drive motor is disconnected and the motor is locked, then manual intervention is required to start; the processing method is simple and fast, and the processing time is within 3 seconds. |
Solution list of this Project:
No. | Items | Quantity | Unit |
---|---|---|---|
1 | Unidirectional lurking and pulling AGV 500KG Payload | 7 | Unit |
2 | Lead-acid Battery Charger | 7 | pcs |
3 | 75AH Lead-acid Battery | 14 | Unit |
4 | Battery Cart | 7 | pcs |
5 | AGV Dispatch System | 1 | Unit |
6 | Central Management System | 1 | Unit |
7 | Wireless Release Button | 14 | pcs |
8 | Magnetic Strip for Navigation | 1500 | Meters |
9 | Tape for Protecting the Magnetic Strip | 1500 | Meters |
10 | RFID Card | 300 | pcs |
11 | AGV Solution Design | 1 | pcs |
12 | Installation and Commissioning | 1 | pcs |
13 | Accompanying Factory Production | 1 | pcs |
14 | Packaging, Transportation, Insurance, Training,Acceptance | 1 | pcs |
Training and Services:
Training Plan | We provide AGV operating training to help our customers, and to solve basic problems while the AGV is operating and increase the efficiency. Two plans: 1, Customers assign staff to our company to get trained once we finish the manufacturing and testing in our factory, then they are qualified to get back to working site to give instructions. 2, Our company could send our staff to our customers' project site with your permission to help. |
Pre-Sales Service | Free consulting service Customize non-standard product Free technical consulting for specific requirement and particular construction scheme |
Mid-Sales Service | We will recommend the most suitable product based on your requirements |
After-sales Service | Free technical operating training Free instruction on installation and debugging Satisfying solution within 12 - 24 hours since your request is received |
Maintenance Service | Support. An agreement will be signed. |